Keelboat List‎ > ‎

Rascal

Showing 21 items
DateNameDamageRemarksBoat PartPriorityProgress
DateNameDamageRemarksBoat PartPriorityProgress
October 17, 2009 Kerem K Mainsail top batten fell off  Sail Low Waiting 
October 22, 2009 Goran Lifesling bag need repair  Hardware Low Completed 
October 17, 2009 Kerem K no snatch blocks for the spinnaker we never had one to start with Hardware Low Waiting 
October 17, 2009 Kerem missing electrical tape manual horn in ankle drawer Hardware Low Waiting 
October 25, 2009 randy e missing reef hook: cunningham hook is not a reefhook. might use with a line around mast and through reef tack grommet must design fixed reef tack system to keep tack grommet down and close to mast. consider undesigned load on sail slides Sail High Waiting 
October 17, 2009 Alex White bracket attaching boom vang to the mast broke using other mast base connection: wearing on sea hood. good thing? Rigging Low Delayed 
October 25, 2009 randy e pt traveller eyestrap loose  Hardware Low Waiting 
October 25, 2009 randy e would do well to glass in boat hook clips under lazarette for immediate access  Hardware Low Waiting 
October 25, 2009 randy e anchor thimbles should be seized to help retain thimble in eyesplice when pulling hard  Hardware Medium Waiting 
October 25, 2009 randy e reefing lapper: stitching undone, 4th seam from bottom needs chafe gear/tape here: wears against spreader Sail Medium In Progress 
October 25, 2009 randy e Genny #1 (old) head luff tape torn +60% beyond designed gap. tack tape torn, too  Sail Low Waiting 
October 25, 2009 randy e missing the footing (footer?) control line. fittings are there, just needs a line i think it's another way to flatten the sail; the two grommets just above the clew & tack (not the reef grommets) Sail Low Waiting 
October 25, 2009 randy e missing tools: e-tape, (working) vice grips, adjustable wrench, cotter pins & clevis pins & shackles. fuses & bulbs correct for boat? Hardware Low Waiting 
October 25, 2009 randy e bulkheads are *very* wet around chainplates. need to well seal the thru-decks very wet under mast, too. must seal all thru-decks or won't last Rigging Medium Waiting 
October 25, 2009 randy e forward clutch cleat handle broken...do replacement parts exist or would it have to be replaced?  Rigging Low Waiting 
October 25, 2009 randy e boom/mainsheet tang bolt unusually rusty/sloppy. worth removing casting to inspect tang is bent & ovalled. worth replacing. stamped shackle for this task seems weak to me, but...probably okay Hardware Medium Waiting 
October 25, 2009 randy e toggle split rings should be replaced with cotter pins: split rings (ring dings, etc) get snagged by rope & clothing charlotte had a ring unwinding. turnbuckle split rings could be taped, but better use seizing wire Hardware Low Waiting 
October 25, 2009 randy e Genny #1 (new): torn leach stitching under 6th seam. needs chafe tape at spreader  Sail Medium In Progress 
October 25, 2009 randy e anchors laying in water, day after day, in a loose mess, lost under cockpit and or too deep forward maybe glass tabs along hull to hem them in directly under hatch; so they can't slide forward where water often stands or under cockpit Hardware Low Waiting 
October 17, 2009 Kerem K Lifeline snapped off the top of stanchion on stbrd side  too much tension on lifeline b/c of the spin guy resting on it (Fisheries supply part#40829 $10.55) Hardware High Completed 
October 25, 2009 randy e bottle screw seizing nut cracked: pt upper  Rigging Medium Completed 
Showing 21 items